|
Post by tflyboy77 on Jun 6, 2010 9:33:02 GMT -5
Just finished my first herb adams front leaf spring mod. I cant wait to get it back in the car with my brand new moser 12 bolt. The mod was surprisingly easy to do. The first bracket I modified, I spent way to much time thinking about it and planning the cuts. My second bracket I just hacked up and it turned out better than the first one.
|
|
|
Post by mr71transam on Jun 21, 2010 14:45:35 GMT -5
What's the chance you can post a more detailed description and maybe a few pictures of this modification?
Rick H
|
|
Too Fast
Junior Member
6 spd, Hooker LT
Posts: 68
|
Post by Too Fast on Jul 6, 2010 14:45:20 GMT -5
Not sure exactly what you are talking about. Is it a mod for the front part of the rear leaf spring? Pictures, x2. And how does it handle now?
|
|
|
Post by IFCprez on Jul 7, 2010 11:36:47 GMT -5
You drill a hole about 1" above the factory hole in the front leaf spring shackles. This pivots the nose of the axle up slightly in the front to offer more anti-squat - it's sort of like getting slapper bars out of factory springs.
Herb used to sell the modified shackles through VSE. I believe Matt may repop them if there's enough interest at Nat's...
|
|
|
Post by tflyboy77 on Jul 20, 2010 6:25:28 GMT -5
Theres really not much to it Just make sure you have a spare set laying around. My first set I did didnt turn out to my liking.
|
|
|
Post by gtikilila on Jun 10, 2019 19:22:56 GMT -5
|
|
|
Post by olejceg on Jun 10, 2019 21:04:11 GMT -5
|
|